Use the manage device page to reset the panel device or temporarily change the way it communicates on the BACnet link.
Select:
Reset Device: sends the BACnet device a "ReinitializeDevice" command of "WarmStart." This will have the same effect as power cycling the device.
Reset Device (Cold): sends the BACnet device a "ReinitializeDevice" command of "ColdStart." The ColdStart command behavior is defined by the BACnet vendor of the device. For Trane BCUs, this is the equivalent of a Clear RAM and Reset.
Disable All Device Communication: sends the BACnet device a "DeviceCommunicationControl" command of "Disable." This disables all communication from the device except subsequent "DeviceCommunicationControl" or "ReinitializeDevice" commands. Set the duration for this operation.
Disable Device Communication Initiation: sends the BACnet device a "DeviceCommunicationControl" command of "Disable Initiation." This disables all communication initiation from the device. The device should still respond normally to any BACnet messages it receives. Set the duration for this operation.
Click Apply to apply your changes.