| Property | Type | Description |
|
Alarm Event Class |
Numeric |
An index into the event action table. The event action table contains both a set of instructions for alarm routing, and a stretchy list of referencer objects (the potential receivers). |
|
Analog In Failure[1–48] |
Binary |
This arrayed property contains the current value of all TRS analog input failure flags. 0=NORMAL, 1=FAIL |
|
Analog In[01–48] |
Numeric |
This arrayed property contains the current value of all TRS analog inputs. All values are in raw unscaled format. |
|
Analog Out Failure[01–24] |
Binary |
This arrayed property contains the current value of all TRS analog output failure flags. 0=NORMAL, 1=FAIL |
|
Analog Out[01–24] |
Numeric |
This arrayed property contains the current value of all TRS analog outputs. |
|
Binary In Class B Failure[01–96] |
Binary |
This arrayed property contains the current value of all TRS binary input class B failure flags. 0=NORMAL, 1=FAIL |
|
Binary In Class B[01–96] |
Binary |
This arrayed property contains the current value of all TRS Binary inputs (class B). |
|
Binary In Failure[01–96] |
Binary |
This arrayed property contains the current value of all TRS binary input class C failure flags. 0=NORMAL, 1=FAIL |
|
Binary In[01–96] |
Binary |
This arrayed property contains the current value of all TRS Binary inputs (class C). |
|
Binary Out Failure[01–96] |
Binary |
This arrayed property contains the current value of all TRS binary output failure flags. 0=NORMAL, 1=FAIL |
|
Binary Out[01–96] |
Binary |
This arrayed property contains the current value of all TRS binary outputs. |
|
Card Number: Saved[1–6] |
Numeric |
Each I/O card installed in the TRS is equipped with an address thumbwheel switch that is set on installation to define the address of the I/O points on the card. This property indicates the setting on this thumbwheel for the appropriate card slot (1–6) as of the last time the TRS was reset. |
|
Card Number[1–6] |
Numeric |
Each I/O card installed in the TRS is equipped with an address thumbwheel switch that is set on installation to define the address of the I/O points on the card. This property indicates the active setting on this thumbwheel for the appropriate card slot in the TRS (1–6). |
|
Card Type: Saved[1–6] |
Numeric |
This property indicates the I/O card type (i.e., Analog Input, Binary Output, etc.) for the applicable card slot in the TRS (1–6) as of the last time the TRS was reset. |
|
Card Type[1–6] |
Numeric |
This property indicates the active I/O card type (i.e., Analog Input, Binary Output, etc.) for the applicable card slot in the TRS (1–6). |
|
Communication Address |
Numeric |
This property provides access to the assigned communications address value of the UCM being represented. |
|
Communication Bad Message Count |
Numeric |
This is a property for keeping track of the number of message errors which occur when attempting to communicate with the UCM. |
|
Communication Channel |
Numeric |
This property provides access to the assigned communications channel value of the UCM being represented. |
|
Communication Error Count |
Numeric |
This is a property for keeping track of the number of communications errors that occur when attempting to communicate with the UCM. |
|
Object Identifier |
Object ID |
Unique hexadecimal ID of this object. This ID is used internally to identify the object. However, when displayed the object’s name appears. |
|
Object Type |
Multi-State |
Designates object’s type (i.e., analog input, binary output, TCM, PCM, etc.). |
|
Pulse Accumulator Failure[01–12] |
Binary |
This arrayed property contains the current value of all TRS pulse accumulator failure flags. 0=NORMAL, 1=FAIL |
|
Pulse Accumulator[01–12] |
Numeric |
This arrayed property contains the current value of all TRS Pulse Accumulators. |
|
UCM Card Configuration Change |
Binary |
This property indicates that the TRS card configuration has changed. 0=NO CHANGE, 1 =CHANGE |
|
UCM Command |
Numeric |
Not Applicable. |
|
UCM Deadman Timeout |
Binary |
This property represents a hardware timeout. 1=ACTIVE |
|
UCM Power Loss |
Binary |
This property represents a TRS power failure. 1=ACTIVE |
|
Update Tag |
Numeric |
Object instance update tag. This tag is used to indicate that the nonvolatile memory resident data within the particular instance has changed. The workstation is the primary user of this property. |