Chiller Plant Status

Chiller Plant Status provides an overview of the current conditions and the status values for the selected chiller plant.

Some of the point values can be edited. Click Edit to change the page from view mode to edit mode.
To set up a new data log for a value, select one or more rows and click Set Up Data Logs.
Select one or more setpoints and click View Live Data to view a live data feed from the setpoint. A popup window displays the data trend. You can select to view data from the last 5 minutes, 30 minutes, 2 hours, or since the start.
Point values that can be overridden are indicated with one of three override icons:
- Overrideable Not in Override: indicates that the point is overrideable, but it is not currently in override.
- Overridden No Expiration: Indicates that the point is overrideable and is currently overridden with no expiration time.
- Overridden with Expiration: Indicates that the points is overrideable and overridden with an expiration time.
Points that are in alarm are indicated by a red stop sign icon.
Points that are out of service are indicated by a gold i icon.

This page provides an overview of the current conditions and the status values for the selected chiller plant.

To enable or disable the entire chiller plant, click Edit, change the value for Chiller Plant Enabled, and click Save.
The following functions are available on the main chiller status page:
To manually rotate the chillers that are in service now instead of waiting for normal rotation, click Force Rotation.
To manually bring in the next available chiller into service in the chiller plant, click Force Add.
To manually remove a chiller from service in the chiller plant, click Force Subtract.

Select an individual chiller and click Failure Reset to clear a failed status and return the chiller to normal operation.
Select an individual chiller and click Make Unavailable to prevent a chiller plant from put into service by the chiller plant.
Select an individual chiller and click Make Available to restore a previously unavailable chiller to available status.
To reassign the swing and numbered chillers, click Edit then select a new value under New Value for each chiller and click Save.

Possible Error Messages