Binary Output and Setpoint Status

Binary Output and Setpoint Status provides an overview of the current conditions and the status values for binary outputs for a building. All the analog outputs for the building are listed by name. They could represent actual variables measured by sensors or might not be connected to a sensor at all.

• Some of the point values can be edited. Click Edit to change the page from view mode to edit mode.
• To set up a new data log for a value, select one or more rows and click Set Up Data Logs.
• Select one or more setpoints and click View Live Data to view a live data feed from the setpoint. A popup window displays the data trend. You can select to view data from the last 5 minutes, 30 minutes, 2 hours, or since the start.
• Point values that can be overridden are indicated with one of three override icons:
• • Overrideable Not in Override: indicates that the point is overrideable, but it is not currently in override.
  • Overridden No Expiration: Indicates that the point is overrideable and is currently overridden with no expiration time.
  • Overridden with Expiration: Indicates that the points is overrideable and overridden with an expiration time.
• Points that are in alarm are indicated by a red stop sign icon.
• Points that are out of service are indicated by a gold i icon.

• All the binary outputs for the building are listed by name.  They may or may not directly represent physical outputs on building controllers.

• Error: You did not select any items...
• Error: You left necessary fields blank or entered invalid values...

Related topics

• Binary Outputs and Setpoints: View
• Selecting, Sorting, and Filtering Tables
• Data Logs: Create, Edit, and Delete
• Overrides: View, Create, Remove
• Tracer SC Panels: View Directly
• User Roles: Assign